Skip to content

AtomOD63T

Outdoor 5G CPE
AtomOD06T-1
AtomOD06T-3
AtomOD06T-2

AtomOD63T 5G Outdoor CPE

Baicells 5G outdoor CPE supports two network architectures, 5G Standalone (SA) and non-Standalone (NSA), with faster transmission speed, better bearing capacity and lower network delay.

The CPE supports 5G Sub6 band access to base station, LAN side provides RJ45 Ethernet interface, can connect with external Wi-Fi router to providing perfect experience for customers in laptop, gateway, industrial monitoring, telemedicine, unmanned aerial vehicle (UAV), virtual reality and immersive experience (VR and AR).

The product comes with a standard one-year warranty; an extended warranty is available.

AtomOD63T 5G Outdoor CPE Datasheet

Download

  • NOTE: Features can vary based on model or region.

    • 5G SA/NSA Dual mode
    • Supports NR Bands: N1/N3/N5/N7/N8/N20/N28/N38/N40/N41/N66/N77/N78n
    • Supports TDD Bands: B38/B40/B41/B42/B43 
    • Supports LTE FDD Bands: B1/B3/B5/B7/B8/B20/B28/B32
    • Complies with 3GPP Release 16 standards
    • 1000 Mbps Ethernet interface
    • Peak data rate of up to NR SA DL 4670 Mbps, UL 1250 Mbps; NR NSA DL 5470 Mbps, UL 1350 Mbps
    • 256QAM for DL and 256QAM for UL as the highest order modulation formats.
    • Built-in directional 5G antennas
    • GUI-based local and remote Web management
    • Excellent Non-Line-of-Sight (NLOS) coverage
    • Supports TR069 network management protocol
    • Cell lock, SIM lock, and pin lock
    • User-friendly LED status indicators
    • Transparent bridge mode (L2 Support).

Standard

3GPP Release16

Mode

TDD/FDD

Channel Bandwidth

5~100 MHz

Multiplexing

LTE: DL 2x2 MIMO

NR: DL 4x4 MIMO, UL 2x2MIMO

Security

Firewall: IP/MAC/URL filter; ACL rule

Ethernet Interfaced

1*RJ-45 port 10/100/1000 auto-sensing, auto-MDX, WAN/LAN

Protocols Used

IPv4/IPV6, UDP, TCP, IP, ICMP, SNMPv2c, SNMPv3c, HTTPS, SSH, TELNET, TR069, TR104, CBSD

Network Management

Web GUI, ACS, OMC, SNMP

VLAN

802.1Q

Peak Rate

 

DL (Mbps)

UL (Mbps)

NR SA

Max. 4670

Max. 1250

NR NSA

Max. 5470

Max. 1350

LTE

Max. 1600

Max. 200

Modulation

DL: QPSK, 16QAM, 64QAM, 256QAM

UL: QPSK, 16QAM, 64QAM, 256QAM

Carrier Aggregation

LTE: Up to 5DL / 2UL

EN-DC: Up to LTE 4DL + FR1

Transmit Power

Power Class 3 (23dBm±1.5dBm) for LTE Bands

Power Class 3 (23dBm±1.5dBm) for NR Bands

Power Class 2 (26dBm±1.5dBm) for N41

Receive Sensitivity

N41 (100MHz), -85dBm

Network Mode

NAT or Bridge

SIM

PIN management, SIM lock

Network Connection

Auto or manual

LTE Scan Mode

Full band scan or frequency lock

VPN

L2TP L2/L3, GRE L2/L3

NAT

Port forwarding, port trigger, DMZ, ALG

Diagnostics

TCP dump, ping, traceroute

Statistics

LTE status; connection/system up time; device status; DHCP client list; firewall status

Maintenance

Date and time setting; reboot; restore factory settings; restore or back up configuration file; firmware upgrade locally or OTA

LED Indicators

Power, WLAN, Internet, Cellular

USIM

1.8V/3V 4FF

Restore Button

Press for 10 seconds to restore the CPE to its factory settings

WPS Button

Press for WPS or Easy Mesh* configuration

Power Switch

Push 1.5s for ON/OFF

Temperature
  • Operating Temperature: -40°C to 55°C
  • Storage Temperature: -40°C to 70°C
  • With POE Adaptor:
  • INPUT 100-240VAC
  • OUTPUT 24VDC 0.5A

Humidity

5%~95%

Power Consumption

<20 W

Power Supply

  

Weight

About 23oz / 660g

Dimension

9.5 x 6.0 x 3.4 inches / 242 x 152 x 86 millimeters