Skip to content

PhotonOD63G

5G Outdoor CPE
AtomOD15G-HP-1
AtomOD15G-HP-2
AtomOD15G-HP-3

PhotonOD63G 5G Outdoor CPE

Baicells 5G outdoor CPE supports two network architectures, 5G Standalone (SA) and non-Standalone (NSA), with faster transmission speed, better bearing capacity and lower network delay.

CPE supports 5G Sub6 band access to base station, LAN side supports WIFI6 access, providing perfect experience for customers in laptop, gateway, industrial monitoring, telemedicine, unmanned aerial vehicle, virtual reality and immersive experience (VR and AR).

The product comes with a standard one-year warranty; an extended warranty is available.

PhotonOD63G 5G Outdoor CPE Datasheet

Download

NOTE: Features can vary based on model or region.

  • 5G SA/NSA Dual mode
  • Supports NR Bands: N41/N48/N78
  • Supports TDD Bands: B41/B42/B43/B48(CBRS)
  • Complies with 3GPP Release 16 standards
  • 2500 Mbps Ethernet interface
  • Peak data rate of up to NR SA DL 2400 Mbps, UL 900 Mbps; NR NSA DL 3400Mbps, UL 555Mbps
  • 256QAM for DL and 256QAM for UL as the highest order modulation formats.
  • Built-in bipolar directional 5G antenna
  • GUI-based local and remote Web management
  • Excellent Non-Line-of-Sight (NLOS) coverage
  • Supports TR069 network management protocol
  • Cell lock, SIM lock, and pin lock
  • User-friendly LED status indicators
  • Pole or wall mounted
  • Transparent bridge mode* (L2 Support).

Standard

3GPP Release16

Mode

TDD/FDD

Channel Bandwidth

NR: 5~100 MHz

LTE: 100 MHz as maximum aggravated bandwidth (5 CC)

EN-DC: 80+100 MHz (4 DL + FR1)

Frequency Bands

N41 (2496 MHz - 2690 MHz)

N48 (3550 MHz - 3700 MHz)

N78 (3300 MHz - 3800 MHz)

B41 (2496 MHz - 2690 MHz)

B42 (3400 MHz - 3600 MHz)

B43 (3600 MHz - 3800 MHz)

B48 (3550 MHz - 3700 MHz)

Multiplexing

LTE: DL 4x4 MIMO

NR: DL 4x4 MIMO, UL 2x2MIMO

Security

Firewall: IP/MAC/URL filter; ACL rule

Ethernet Interfaced

1 RJ-45 port 10/100/2500 auto-sensing, auto-MDX, PoE

1 RJ-45 port 10/100/1000 auto-sensing

Protocols Used

IPv4/IPV6, UDP, TCP, IP, ICMP, SNMPv2c, SNMPv3c, HTTPS, SSH, TELNET, TR069, TR104, CBSD

Network Management

Web GUI, ACS, OMC, SNMP

VLAN

802.1Q

Peak Rate

 

DL (Mbps)

UL (Mbps)

NR SA

Max. 2400

Max. 900

NR NSA

Max. 3400

Max. 555

LTE

Max. 1600

Max. 211

Modulation

DL: QPSK, 16QAM, 64QAM, 256QAM

UL: QPSK, 16QAM, 64QAM, 256QAM

Carrier Aggregation

LTE: Up to 5DL / 4UL

EN-DC: Up to LTE 5DL + NR 1DL or LTE 2DL + NR 2DL / LTE 3UL + NR 1UL

NR SA: Up to 2DL* / 2UL

Transmit Power

Power Class 3 (23dBm±1.5dBm) for LTE Bands

Power Class 3 (23dBm±1.5dBm) for NR Bands

Power Class 2 (26dBm±1.5dBm) for B41/B48*/N41/N48*/N77

Receive Sensitivity

N41 (100MHz), -85dBm

N48 (20MHz), -94dBm

N77 (100MHz), -86dBm

Network Mode

NAT or Bridge

SIM

PIN management, SIM lock

Network Connection

Auto or manual

LTE Scan Mode

Full band scan or frequency lock

VPN

L2TP L2/L3, GRE L2/L3

NAT

Port forwarding, port trigger, DMZ, ALG

Diagnostics

TCP dump, ping, traceroute

Statistics

LTE status; connection/system up time; device status; DHCP client list; Wi-Fi station list; firewall status

Maintenance

Date and time setting; reboot; restore factory settings; restore or back up configuration file; firmware upgrade locally or OTA

CBRS

Automatic installation of CBSD certificate*

IP Protection Rating

IP67

LED Indicators

MIU, LTE, SIM, LAN, PWR, LTE Signal

USIM

1.8V/3V 4FF

Restore Button

Press for 10 seconds to restore the CPE to its factory settings

Temperature
  • Operating Temperature: -40°F to 131°F / -40°C to 55°C
  • Storage Temperature: -40°F to 158°F / -40°C to 70°C
  • INPUT 100-240VAC
  • OUTPUT 24/48VDC 1A

Humidity

5%~95%

Power Consumption

<24 W

Power Supply

With PoE Adaptor:

Weight

About 7.3lbs / 3.47kg

Dimensions

200 x 48 x 163 mm