PhotonID63M
5G Indoor CPE
PhotonID63M 5G Indoor CPE
Baicells 5G indoor CPE supports two network architectures, 5G Standalone (SA) and non-Standalone (NSA), with faster transmission speed, better bearing capacity and lower network delay.
CPE supports 5G Sub6 band access to base station, LAN side supports WIFI6 access, providing perfect experience for customers in laptop, gateway, industrial monitoring, telemedicine, unmanned aerial vehicle (UAV), virtual reality and immersive experience (VR and AR).
The product comes with a standard one-year warranty; an extended warranty is available.
PhotonID63M 5G Indoor CPE DataSheet
DownloadNOTE: Features can vary based on model or region.
- 5G SA/NSA Dual mode
- Supports NR Bands: N1/N3/N5/N7/N8/N20/N28/N38/N40/N41/N66/N77/N78
- Supports TDD Bands: B38/B40/B41
- Supports LTE FDD Bands: B1/B2/B3/B4/B5/B7/B8/B20/B28/B66
- Complies with 3GPP Release 15 standards
- 1000 Mbps Ethernet interface
- Supports WiFi6 AX1800, dual-bands
- Peak data rate of up to NR SA DL 2000 Mbps, UL 1000 Mbps; NR NSA DL 2600Mbps, UL 650Mbps
- 256QAM for DL and 256QAM for UL as the highest order modulation formats.
- Built-in Omni-directional 5G and Wi-Fi antennas
- GUI-based local and remote Web management
- Excellent Non-Line-of-Sight (NLOS) coverage
- Supports TR069 network management protocol
- Cell lock, SIM lock, and pin lock
- User-friendly LED status indicators
- Transparent bridge mode (L2 Support).
- Built in battery 4400mAh*(Optional)
|
Standard |
3GPP Release15 |
|
Mode |
TDD/FDD |
|
Channel Bandwidth |
NR: 5~100 MHz LTE: 60 MHz as maximum aggregated bandwidth (3 CC) EN-DC: 60+100 MHz (3DL + FR1) |
|
Multiplexing |
LTE: DL 2x2 MIMO NR: DL 4x4 MIMO, UL 2x2MIMO |
|
Security |
Firewall: IP/MAC/URL filter; ACL rule |
|
Ethernet Interfaced |
3 RJ-45 port 10/100/1000 auto-sensing, auto-MDX, WAN/LAN |
|
Protocols Used |
IPv4/IPV6, UDP, TCP, IP, ICMP, SNMPv2c, SNMPv3c, HTTPS, SSH, TELNET, TR069, TR104, CBSD |
|
Network Management |
Web GUI, ACS, OMC, SNMP |
|
VLAN |
802.1Q |
|
Peak Rate |
|
DL (Mbps) |
UL (Mbps) |
|
NR SA |
Max. 2000 |
Max. 1000 |
|
|
NR NSA |
Max. 2600 |
Max. 650 |
|
|
LTE |
Max. 600 |
Max. 150 |
|
|
Modulation |
DL: QPSK, 16QAM, 64QAM, 256QAM UL: QPSK, 16QAM, 64QAM, 256QAM |
||
|
Carrier Aggregation |
LTE: Up to 3DL / 2UL EN-DC: Up to LTE 3DL + FR1 |
||
|
Transmit Power |
Power Class 3 (23dBm±1.5dBm) for LTE Bands Power Class 3 (23dBm±1.5dBm) for NR Bands Power Class 2 (26dBm±1.5dBm) for B41/N41/N77/N78 |
||
|
Receive Sensitivity |
N41 (100MHz), -85dBm N78 (100MHz), -86dBm |
||
|
Network Mode |
NAT or Bridge |
|
SIM |
PIN management, SIM lock |
|
Network Connection |
Auto or manual |
|
LTE Scan Mode |
Full band scan or frequency lock |
|
VPN |
L2TP L2/L3, GRE L2/L3 |
|
NAT |
Port forwarding, port trigger, DMZ, ALG |
|
Diagnostics |
TCP dump, ping, traceroute |
|
Statistics |
LTE status; connection/system up time; device status; DHCP client list; Wi-Fi station list; firewall status |
|
Maintenance |
Date and time setting; reboot; restore factory settings; restore or back up configuration file; firmware upgrade locally or OTA |
|
LED Indicators |
Power, WLAN, Internet, Cellular |
|
USIM |
1.8V/3V 4FF |
|
Restore Button |
Press for 10 seconds to restore the CPE to its factory settings |
|
WPS Button |
Press for WPS or Easy Mesh* configuration |
|
Power Switch |
Push 1.5s for ON/OFF |
|
Temperature |
|
|
Humidity |
5%~95% |
|
Power Consumption |
<20 W |
|
Power Supply |
With DC Adaptor: |
|
Weight |
About 1.98lbs/0.9kg |
|
Dimension |
About 98 x 108 x 227millimeters |
Wi-Fi SPECIFICATIONS
|
Standard |
IEEE 802.11b/g/n/ax |
|
Channel Bandwidth |
20MHz,40MHz,80 MHz |
|
Frequency |
2.4 GHz, 5GHz |
|
MIMO |
2x2 |
|
Peak Rate |
802.11b: 11Mbps 802.11g: 54Mbps, 802.11n: 300mbps, 802.11ac: 867Mbps 802.11ax 5G: 1200Mbps 802.11ax 2.4G: 574Mbps |
|
Modulation |
DSSS/CCK, OFDM |
|
Receive Sensitivity |
802.11b BW20 : -99.5dBm (1M), -91dBm (11M) 802.11g BW20 : -96dBm (6M), -78dBm (54M) 802.11n: HT20 : -95.5dBm (MCS0), -75dBm (MCS7) 802.11n: HT40 : -93dBm (MCS0), -72dBm (MCS7) 802.11ac: VHT20: -95.5dBm (MCS0), -71dBm (MCS9) 802.11ac: VHT40: -93dBm (MCS0), -69dBm (MCS9) 802.11ax: HE20: -95.5dBm (MCS0), -65.5dBm (MCS11) 802.11ax: HE40: -93dBm (MCS0), -63dBm (MCS11) |
|
Max Output Power |
20 dBm * 2 + 20 dBm * 2 |
|
Antenna Type |
Internal omni 2T2R |
|
Antenna Gain |
3-5 dBi |
|
Users |
128 |
.png?width=2497&height=578&name=Baicells_logo_rgb_%E7%99%BD(%E9%80%8F%E6%98%8E).png)