Skip to content

Nova227

2x250mW Outdoor Base Station

 

19.5dBi CPE-1
19.5dBi CPE-2

Nova227 Outdoor Base Station

Nova227 is a 2x250mW LTE TDD outdoor microcell eNodeB (eNB). It is simple and compact design, low power consumption, and it can provide excellent performance. Combined with macro station, Nova227 is an effective supplement to network deployment and improves the three-dimensional coverage effect of the network. Nova227 is applied to blind coverage in dense areas, network edge coverage, network capacity improvement in areas with concentrated traffic.

When paired with self-install indoor User Equipment (UE), such customer sets can be captured quickly and with a near-immediate ROI. For private network operators, this microcell is perfect for clusters of cameras, such as those used at traffic intersections, and other devices.

This product comes with a standard one-year warranty; an extended warranty is available. 

Nova227 Outdoor Base Station Datasheet

Download

Nova227 Configuration Guide

Download

NOTE: Features can vary based on model or region.

  • Standard LTE TDD Bands 38/40/41/42/43/48
  • GUI-based local and remote Web management
  • Suitable for private and public deployments; any IP based backhaul can be used, including public transmission protected by Internet Protocol Security (IPsec)
  • Compact, all-in-one design of internal antenna and integrated GPS
  • Excellent Non-Line-of-Sight (NLOS) coverage
  • Peak rate: Up to DL 110 Mbps and UL 14 Mbps with 20 MHz bandwidth
  • 32 RRC connected users
  • Cloud /Local/Embedded EPC (HaloB) is supported for more convenient and economical deployment
  • Supports Citizens Broadband Radio Service (CBRS)
  • Plug-and-play with Self-Organizing Network (SON) capabilities
  • Inter operation with all standard LTE Evolved Packet Core (EPC)
  • Supports TR-069 network management interface
  • Lower power consumption, which reduces OPEX, can be powered easily by Baicells compact outdoor smart UPS

Standard

LTE TDD RAN (3GPP R13.50 compliant)

TDD UL/DL Configuration

0, 1, 2 (with Special Subframe Configuration 7)

Frequency Band

B38 (2570 MHz – 2620 MHz)

B40 (2300 MHz– 2400 MHz)

B41 (2496 MHz – 2690 MHz)

B42 (3400 MHz– 3600 MHz)

B43 (3600 MHz– 3800 MHz)

B48 (3550 MHz – 3700 MHz)

Channel Bandwidth

5/10/15/20 MHz

Multiplexing

MIMO: 2x2 (DL)

Security

Radio: SNOW 3G/AES-128/ZUC
Backhaul: IPsec (X.509 AES-128, AES-256, SHA-128)

Ethernet Interface

1 RJ-45 Ethernet interface (1 GE)

Power Supply

PoE+ (IEEE 802.3at compliant)

Protocols Used

IPv4, UDP, TCP, ICMP, NTP, SSH, IPsec, TR-069, SNMPv2c, HTTP/HTTPs, 1588v2, DHCP

Network Management

IPv4, HTTP/HTTPs, TR-069, SSH, Embedded EPC

VLAN/VxLAN

802.IQ/VxLAN

LED Indicators

4 x status LED

PWR/ACT/RUN/ALM

Peak Data Rate

20 MHz

DL (Mbps)

UL (Mbps)

UL/DL Config 0

50

42

UL/DL Config 1

80

28

UL/DL Config 2

110

14

10 MHz

DL (Mbps)

UL (Mbps)

UL/DL Config 0

25

21

UL/DL Config 1

40

14

UL/DL Config 2

55

7

User Capacity

32 RRC connected users

Maximum Deployment Range

5 kilometers

Latency

30 milliseconds

Receive Sensitivity

-101 dBm @ Band38/40/41

-100 dBm @ Band42/43/48

Modulation

MCS0 (QPSK) to MCS28 (64QAM)

Transmit Power Range

0 to 27 dBm (combined, with 1 dB interval)

Quality of Service

Nine-level priority indicated by QoS Class Identifiers (QCI)

ARQ/HARQ

Yes

Synchronization

GPS (built-in), 1588v2

Voice

VoLTE, Circuit Switched Fallback (CSFB) to GSM

SON

Self-Organizing Network

  • Automatic setup
  • Automatic Neighbor Relation (ANR)
  • PCI confliction detection

EPC

HaloB (Embedded EPC)

Traffic Offload

Local breakout

Layer 2 Support

Transparent Bridge Mode*

Maintenance
  • Local/Remote Web maintenance
  • Online status management
  • Performance statistics
  • Fault management
  • Local/Remote software upgrade
  • Logging
  • Connectivity diagnosis
  • Automatic start and configuration
  • Alarm reporting
  • User information tracing
  • Signaling trace

Surge Suppression

Yes

Power Interface Lightning Protection

Differential mode: ±10 KA
Common mode: ±20 KA

MTBF

≥ 150000 hours

MTTR

≤ 1 hour

Ingress Protection Rating

IP66

Operating Temperature

-40°F to 131°F / -40°C to 55°C

Storage Temperature

-49°F to 158°F / -45°C to 70°C

Humidity

5% to 95% RH

Atmospheric Pressure

70 kPa to 106 kPa

Power Consumption

Typical 18W, maximum 25W

Weight

6.1 lbs / 2.75 kg

Dimensions (HxWxD)

9.8 x 9.8 x 3.2 inches

248 x 248 x 80 millimeters

Installation

Pole or wall mount