NeutrinoE224_FDD
2x125mW Picocell eNodeB
NeutrinoE224_FDD Indoor Base Station
The NeutrinoE224 is an indoor 2x125mW picocell eNodeB (eNB), which offers lower cost access for indoor user equipment (UE) and solve indoor blind area problem and enhance the hotspot capacity. It is specifically used in family, small enterprise, and other indoor scenarios. As with all Baicells products, the NeutrinoE224 supports Long-Term Evolution (LTE) technology, and it operates in Frequency Division Duplexing (FDD) mode.
With high capacity and easy deployment, the NeutrinoE224 FDD series eNB can help mobile operators to provide better coverage and higher capacity with lower network deployment cost and operating expense (OPEX).
This product comes with a standard one-year warranty; an extended warranty is available.
NOTE: Features can vary based on model or region.
- Standard LTE FDD Bands 1/2/3/5/7/8
- GUI-based local and remote Web management
- Compact, all-in-one design of internal antenna
- Any IP based backhaul can be used, including public transmission protected by Internet Protocol Security (IPsec)
- Peak rate: Up to DL 150Mbps and UL 50Mbps with 20MHz bandwidth
- 32 RRC connected users
- PoE+ power supply; only one Ethernet cable required for data transmission and power supply
- Configured out of the box to work with Baicells Cloud Core
- Inter operation with all standard LTE Evolved Packet Core (EPC)
- Lower power consumption to reduce OPEX
- Support TR-069 network management interface
|
Standard |
LTE FDD RAN (3GPP R10 compliant) |
|
Frequency Band |
B1 (UL: 1920MHz-1980MHz, DL: 2110MHz-2170MHz) B2 (UL: 1850MHz-1910MHz, DL: 1930MHz-1990MHz) B3 (UL: 1710MHz-1785MHz, DL: 1805MHz-1880MHz) B5 (UL: 824MHz-849MHz, DL: 869MHz-894MHz) B7 (UL: 2500MHz-2570MHz, DL: 2620MHz-2690MHz) B8 (UL: 880MHz-915MHz, DL: 925MHz-960MHz) |
|
Channel Bandwidth |
Band1/2/3/7: 5/10/15/20 MHz Band5/8: 5/10 MHz |
|
Multiplexing |
MIMO: 2x2 (DL) |
|
Security |
Radio: SNOW 3G/AES-128/ZUC |
|
Ethernet Interface |
One RJ-45 Ethernet backhaul interface (1 GE) and one RJ-45 local Mgmt. interface (1 GE) |
|
Power Supply |
12VDC, AC adaptor (multiple standards optional), PoE+, comply with IEEE 802.3at standard |
|
Protocols Used |
IPv4/IPv6 (Dual Stack), UDP, TCP, ICMP, NTP, SSH, IPsec, TR-069, HTTP/HTTPs, 1588v2, DHCP |
|
Network Management |
IPv4/IPv6, HTTP/HTTPs, TR-069, SSH, Embedded EPC |
|
VLAN/VxLAN |
802.IQ/VxLAN |
|
LED Indicators |
3 x status LED PWR/LTE/ALM |
|
Peak Data Rate |
20MHz: DL 150Mbps, UL 50Mbps 10MHz: DL 75Mbps, UL 25Mbps |
|
User Capacity |
32 RRC connected users |
|
Latency |
30 milliseconds |
|
Receive Sensitivity |
-101dBm |
|
Modulation |
MCS0 (QPSK) to MCS28 (64QAM) DL: QPSK, 16QAM, 64QAM UL: QPSK, 16QAM |
|
Transmit Power Range |
0 to 21 dBm per channel (combined +24dBm, configurable) (1 dB interval) |
|
Quality of Service |
Nine-level priority indicated by QoS Class Identifiers (QCI) |
|
ARQ/HARQ |
Supported |
|
Synchronization |
GPS, 1588v2, network listening (NL) |
|
Voice |
VoLTE, Circuit Switched Fallback (CSFB) to GSM and UTRAN |
|
Inter-RAT Mobility |
To GSM, UTRAN and 5G NSA/SA |
|
SON |
Self-Organizing Network
|
|
EPC |
HaloB (Embedded EPC) |
|
Traffic Offload |
Local breakout |
|
UL Interference Detection |
Supported |
|
Maintenance |
|
|
MTBF |
≥ 150000 hours |
|
MTTR |
≤ 1 hour |
|
Operating Temperature |
23°F to 113°F / -5°C to 45°C |
|
Storage Temperature |
14°F to 122°F / -10°C to 50°C |
|
Humidity |
5% to 95% RH |
|
Power Consumption |
Typical 11.25W, maximum 15W |
|
Weight |
1.3 lbs / 570g |
|
Dimensions (HxWxD) |
8.3 x 8.3 x 1.9 inches 210 x 210 x 45 millimeters |
|
Installation |
Ceiling or wall mount, or desktop |
.png?width=2497&height=578&name=Baicells_logo_rgb_%E7%99%BD(%E9%80%8F%E6%98%8E).png)