AuroraM56
AuroraM56 mmW Outdoor Base Station
The Baicells Aurora M56 mmW is an advanced outdoor millimeter wave integrated base station (gNB), which is designed and developed based on Qualcomm 5G SoC solution. This 54 dBm EIRP gNB features low power consumption, a compact form factor, and easy maintenance.
This product helps operators to enhance the coverage performance of 5G networks effectively, improve the capacity of 5G networks and eliminate coverage dead zones; meanwhile it also can help to reduce the system power consumption.
This product comes with a standard one-year warranty; an extended warranty is available.
NOTE: Features can vary based on model or region.
- Standard NR Bands: n258 (24.25GHz ~ 27.5GHz); n257(26.5GHz ~ 29.5GHz); n261(27.5GHz ~ 28.3GHz)
- 5G-NR TDD (3GPP R16 compliant)
- GUI-based local and remote Web management
- Supports up to 2x200MHz bandwidth
- Peak data rate:
- Supports PDU session setting
- Supports cell setting
- Supports standalone (SA) mode: FR2 only
- Supports SCTP control (IKE SCTP)
- All In One (AIO) small cell form factor for quick and easy installation
- Highly secure with equipment certification against potential intrusion risk
- Supports TR-069 network management interface
DL:2.5Gbps@2CC*200MHz,
UL:1.6Gbps@2CC*200MHz*(DSUUU)
Its low power consumption reduces OPEX, and the unit can be powered by Baicells compact indoor smart UP
|
Standard |
5G NR TDD (3GPP R16 compliant) |
|
TDD UL/DL Configuration |
0.625ms periodicity (μ=3): DDDSU |
|
Frequency Band |
n257(26.5GHz ~ 29.5GHz) n258 (24.25GHz ~ 27.5GHz) n261(27.5GHz ~ 28.3GHz) |
|
Channel Bandwidth |
200MHz x 2CC* |
|
Multiplexing |
DL:2, UL:2 |
|
Security |
Radio: SNOW 3G/AES-128 |
|
Ethernet Interface |
1 optical (10G SFP+) and 1 RJ-45 Ethernet interface (1 GE) |
|
Power Supply |
-40VDC to -57VDC, nominal -48VDC (optional 90VAC ~ 264VAC, nominal voltage 110/220VAC) |
|
Protocols Used |
IPv4/v6, UDP, TCP, ICMP, NTP, SSH, IPsec, TR-069, HTTP/HTTPs, DHCP |
|
Network Management |
IPv4/v6, HTTP/HTTPs, TR-069, SSH |
|
VLAN |
802.1Q |
|
LED Indicators |
4 status LEDs PWR/ACT/RUN/ALM |
|
Antenna |
64 dual-polarized antenna elements, built-in with Maximum +/-60 degrees |
|
GPS Antenna |
External GPS antenna, N-Type connector |
|
Peak Data Rate |
200 MHz /CC |
DL (Mbps) |
UL (Mbps) |
|
0.625ms periodicity (DDDSU) |
1300@1CC 2400@2CC |
300@1CC 600@2CC* |
|
|
0.625ms periodicity(DSUUU) |
500@1CC 1000@2CC* |
800@1CC 1500@2CC* |
|
|
Latency |
<5 milliseconds |
||
|
Receive Sensitivity |
-105 dBm EIRP(per polarization) |
||
|
Modulation |
UL: MCS0 (QPSK) to MCS28 (64QAM) DL: MCS0 (QPSK) to MCS27(256QAM) |
||
|
Maximum transmit power |
<22dBm |
||
|
Antenna Gain |
27dBi |
||
|
EIRP |
n257: 54dBm EIRP Max. (H+V polarization) @ boresight beam n258: 54dBm EIRP Max. (H+V polarization) @ boresight beam n261: 54dBm EIRP Max. (H+V polarization) @ boresight beam |
||
|
Quality of Service |
Complied with 3GPP standards 5G QoS Identifier (5QI) |
||
|
ARQ/HARQ |
Supported |
||
|
Synchronization |
GPS |
||
|
Voice |
VoNR |
|
Maintenance |
|
|
Surge Suppression |
Network interface: 1KV Power Interface: Differential mode: 2KA; Common mode: 4KA |
|
Lightning Protection |
Power Interface: Differential mode: ±10 KA; Common mode: ±20 KA |
|
MTBF |
≥ 150000 hours |
|
MTTR |
≤ 1 hour |
|
Ingress Protection Rating |
IP65 |
|
Operating Temperature |
-30°C to 50°C |
|
Storage Temperature |
-40°C to 65°C |
|
Humidity |
2% to 95% RH |
|
Atmospheric Pressure |
70 KPa to 106 KPa |
|
Power Consumption |
Typical 150W, Maximum 180W |
|
Weight |
Without bracket: 20.24 lbs/9.2kg With bracket: 21.2 lbs/9.6kg |
|
Dimensions (HxWxD) |
15 x 11 x 3.5 inches 380 x 280 x 88 millimeters |
|
Installation |
Pole or wall mount |
.png?width=2497&height=578&name=Baicells_logo_rgb_%E7%99%BD(%E9%80%8F%E6%98%8E).png)