Nova230 Pro_FDD
Nova230 Pro Outdoor Base Station
The Nova230 Pro is a low power outdoor 2x500mW microcell eNodeB (eNB) specifically for tightly clustered pockets of customers, coverage holes, edges of your network, or simply opportunistic micro targeting, like RV parks, marinas, and high-density dwellings such as townhomes and apartments. As with all Baicells products, the Nova230 Pro supports Long-Term Evolution (LTE) technology, and it operates in Frequency Division Duplexing (FDD) mode.
When paired with self-install indoor user equipment (UE), such customer sets can be captured quickly and with a near immediate ROI. For private network operators, this microcell is perfect for clusters of cameras, such as those used at traffic intersections, and other devices.
The product comes with a standard one-year warranty; extended warranty is available.
NOTE: Features can vary based on model or region.
- Standard LTE FDD Band 2/3
- GUI-based local and remote Web management
- Suitable for private and public deployments; any IP based backhaul can be used, including public transmission protected by Internet Protocol Security (IPsec)
- Excellent Non-Line-of-Sight (NLOS) coverage
- Peak rate: Up to DL 195Mbps and UL 75Mbps with 20MHz bandwidth
- 128 RRC connected users
- PoE++ power supply; only one Ethernet cable required for data transmission and power supply
- Plug-and-play with Self-Organizing Network (SON) capabilities
- Inter operation with all standard LTE Evolved Packet Core (EPC)
- Supports TR-069 network management interface
- Lower power consumption, which reduces OPEX, can be powered easily by Baicells compact outdoor smart UPS
|
Standard |
LTE FDD RAN (3GPP R10 compliant) |
|
Frequency Band |
Band2 (UL: 1850MHz-1910MHz, DL: 1930MHz-1990MHz) Band3 (UL: 1710MHz-1785MHz, DL: 1805MHz-1880MHz) |
|
Channel Bandwidth |
5/10/15/20 MHz |
|
Multiplexing |
MIMO: 2x2 (DL) |
|
Security |
Radio: SNOW 3G/AES-128/ZUC |
|
Voice |
VoLTE, Circuit Switched Fallback (CSFB) to GSM |
|
SON |
Self-Organizing Network
|
|
Traffic Offload |
Local breakout |
|
Maintenance |
|
|
Network Management |
IPv4/IPv6, HTTP/HTTPs, TR-069, SSH |
|
VLAN/VxLAN |
802.IQ/VxLAN |
|
Power Control |
UL Open-loop Power Control, DL Power Allocation (3GPP TS 36.213 compliant) |
|
Quality of Service |
Nine-level priority indicated by QoS Class Identifiers (QCI) |
|
ARQ/HARQ |
Supported |
|
Synchronization |
GPS/BDS (built-in), 1588v2 |
|
Peak Data Rate |
20MHz: DL 195Mbps, UL 75Mbps 10MHz: DL 97.5Mbps, UL 31Mbps |
|
User Capacity |
Up to 128 RRC connected users per cell |
|
Latency |
30 milliseconds |
|
Receive Sensitivity |
-101dBm |
|
Modulation |
MCS0 (QPSK) to MCS27 (256QAM) DL: QPSK, 16QAM, 64QAM, 256QAM UL: QPSK, 16QAM, 64QAM |
|
Transmit Power Range |
0 to 27 dBm per channel (combined +30dBm, with 1 dB interval) |
|
Ethernet Interface |
1 RJ-45 Ethernet interface (1 GE) |
|
Power Supply |
PoE++, comply with IEEE 802.3bt standard |
|
LED Indicators |
4 x status LED PWR/ACT/RUN/ALM |
|
Antenna Type |
External high-gain antenna with N-Type connectors |
|
Power Interface Lightning Protection |
Common mode: 3kA, 8/20μs current wave |
|
MTBF |
≥ 150000 hours |
|
MTTR |
≤ 1 hour |
|
Ingress Protection Rating |
IP65 |
|
Operating Temperature |
-40°F to 131°F / -40°C to 55°C |
|
Storage Temperature |
-49°F to 158°F / -45°C to 70°C |
|
Humidity |
5% to 95% RH |
|
Atmospheric Pressure |
70 kPa to 106 kPa |
|
Power Consumption |
Typical 28W, maximum 35W |
|
Weight |
3.42 lbs / 1.55kg |
|
Dimensions (HxWxD) |
8.7 x 5.9 x 2.05 inches / 221 x 150 x 52 millimeters |
|
Installation |
Pole or wall mount |
.png?width=2497&height=578&name=Baicells_logo_rgb_%E7%99%BD(%E9%80%8F%E6%98%8E).png)