Skip to content

NeutrinoE224 Pro

2x125mW Picocell eNodeB

NeutrinoE224-1
NeutrinoE224-2

NeutrinoE224 Pro Indoor Base Station

The NeutrinoE224 Pro is an indoor 2x125mW picocell eNodeB (eNB), which offers lower cost access for indoor user equipment (UE) and solve indoor blind area problem and enhance the hotspot capacity. It is specifically used in family, small enterprise, and other indoor scenarios. As with all Baicells products, the NeutrinoE224 Pro supports Long-Term Evolution (LTE) technology, and it operates in Frequency Division Duplexing (FDD) mode.

With high capacity and easy deployment, the NeutrinoE224 Pro FDD series eNB can help mobile operators to provide better coverage and higher capacity with lower network deployment cost and operating expense (OPEX).

This product comes with a standard one-year warranty; an extended warranty is available.

NeutrinoE224 Pro Indoor Base Station Datasheet

Download

NeutrinoE224 Pro User Manual

Download

NOTE: Features can vary based on model or region.

  • Standard LTE FDD Bands 7
  • GUI-based local and remote Web management
  • Compact, all-in-one design of internal antenna
  • Any IP based backhaul can be used, including public transmission protected by Internet Protocol Security (IPsec)
  • Peak rate: Up to DL 195Mbps and UL 75Mbps with 20MHz bandwidth
  • 128 RRC connected users
  • PoE+ power supply; only one Ethernet cable required for data transmission and power supply
  • Configured out of the box to work with Baicells Cloud Core
  • Inter operation with all standard LTE Evolved Packet Core (EPC)
  • Lower power consumption to reduce OPEX
  • Support TR-069 network management interface

Standard

LTE FDD RAN (3GPP R10 compliant)

Frequency Band

B7 (UL: 2500MHz-2570MHz, DL: 2620MHz-2690MHz)

Channel Bandwidth

Band7: 5/10/15/20 MHz

Multiplexing

MIMO: 2x2 (DL)

Security

Radio: SNOW 3G/AES-128/ZUC
Backhaul: IPsec (X.509 AES-128, AES-256, SHA-128, SHA-256)

Ethernet Interface

One RJ-45 Ethernet backhaul interface (1 GE) and one RJ-45 local Mgmt. interface (1 GE)

Power Supply

12VDC, AC adaptor (multiple standards optional), PoE+, comply with IEEE 802.3at standard

Protocols Used

IPv4/IPv6 (Dual Stack), UDP, TCP, ICMP, NTP, SSH, IPsec, TR-069, HTTP/HTTPs, 1588v2, DHCP

Network Management

IPv4/IPv6, HTTP/HTTPs, TR-069, SSH, Embedded EPC

VLAN/VxLAN

802.IQ/VxLAN

LED Indicators

3 x status LED

PWR/LTE/ALM

Peak Data Rate

20MHz: DL 195Mbps, UL 75Mbps

10MHz: DL 97.5Mbps, UL 31Mbps

User Capacity

128 RRC connected users

Latency

30 milliseconds

Receive Sensitivity

-101dBm

Modulation

MCS0 (QPSK) to MCS27 (256QAM)

DL: QPSK, 16QAM, 64QAM, 256QAM

UL: QPSK, 16QAM, 64QAM

Transmit Power Range

0 to 21 dBm per channel (combined +24dBm, configurable) (1 dB interval)

Quality of Service

Nine-level priority indicated by QoS Class Identifiers (QCI)

ARQ/HARQ

Supported

Synchronization

GPS, 1588v2, network listening (NL)

Voice

VoLTE, Circuit Switched Fallback (CSFB) to GSM and UTRAN

Inter-RAT Mobility

To GSM, UTRAN and 5G NSA/SA

SON

Self-Organizing Network

  • Automatic setup
  • Automatic Neighbor Relation (ANR)
  • PCI confliction detection

Traffic Offload

Local breakout

Maintenance
  • Local/Remote Web maintenance
  • Online status management
  • Performance statistics
  • Fault management
  • Local/Remote software upgrade
  • Logging
  • Connectivity diagnosis
  • Automatic start and configuration
  • Alarm reporting
  • User information tracing

MTBF

≥ 150000 hours

MTTR

≤ 1 hour

Operating Temperature

23°F to 113°F / -5°C to 45°C

Storage Temperature

14°F to 122°F / -10°C to 50°C

Humidity

5% to 95% RH

Power Consumption

Typical 11.25W, maximum 15W

Weight

1.3 lbs / 570g

Dimensions (HxWxD)

8.3 x 8.3 x 1.9 inches

210 x 210 x 45 millimeters

Installation

Ceiling or wall mount, or desktop